Create Your Own DeltaHawk Virtual Engine Installation

Using CAD Models of the Upright and Inverted Engines you can install a virtual engine in your virtual airframe to answer the burning question of, "will it fit?" Schematic diagrams of Cooling, Lubrication and Fuel systems indicate what might be used in a typical installation. Dimensioned drawings showing engine mount locations and engine center of gravity are provided for the drafting board set as well. A chart is posted showing equipment and components that might be suitable for a typical DeltaHawk engine installation. The information is posted on Rapidshare site that permits downloading large electronic files.

CAD Models

Models of the basic V-4 engine, inverted exhaust system and upright exhaust system are posted on the FTP site. Users will need to download the base engine and the appropriate exhaust system to create a CAD assembly of the complete engine they want to use. The CAD files are available in both STEP or IGES formats.

CAD drawings of Engine and Exhaust Systems available on FTP Site in STEP and IGES formats

Drawing files available in JPEG and DXF formats

If you are using UNIX of some kind, you are on your own.

To download files enter the Rapidshare URL into browser address

AutoCAD® is a Registered Trademark of Autodesk, Inc.